420 stainless steel coil length is used in Shear blades,Needle valves,Surgical equipment,Cutlery,Heat Treatment baskets and jigs,Architectural applications,Gas turbines,Expansion joints,Spiral Welded tube for burner pipes and flues,Welding filler wire and electrodes,Heat Exchangers,etc
| Item | 420 Stainless Steel Coil(Hot rolled, cold rolled) |
| Standard | ASTM A240, JIS4304-2005, ASTM A167, EN10088-2-2005, GB/T3280-2007, etc |
| Material | Stainless Steel 420 Coil |
| Surface | the surface and finish of 420 Stainless Steel Coil: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Thickness | 0.3mm~200mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Package | Standard export package, suit for all kinds of transport, or as required. |
Grade | C | Mn | Si | P | S | Cr | |
420 | min. max. | 0.15 - | - 1 | - 1 | - 0.040 | - 0.03 | 12.0 14.0 |
Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength | Elongation (% in 50mm) | Hardness Brinell (HB) | Impact Charpy V (J) |
Annealed * | 655 | 345 | 25 | 241 max | - |
204 | 1600 | 1360 | 12 | 444 | 20 |
316 | 1580 | 1365 | 14 | 444 | 19 |
427 | 1620 | 1420 | 10 | 461 | # |
538 | 1305 | 1095 | 15 | 375 | # |
593 | 1035 | 810 | 18 | 302 | 22 |
650 | 895 | 680 | 20 | 262 | 42 |
* Annealed tensile properties are typical for Condition A of ASTM A276; annealed hardness is the specified maximum. | |||||
| stainless steel coil tcc setting | wholesale 201 ba stainless steel coil |
| stainless steel coil temp and voltage | wholesale 202 stainless steel coil |
| stainless steel coil temp control | wholesale 2507 stainless steel coil |
| stainless steel coil temp control keeps getting lower | wholesale 2507 stainless steel coil supplier |
| stainless steel coil temperature | wholesale 301 cold rolled stainless steel coil |
| stainless steel coil temperature coefficient | wholesale 301 hot rolled stainless steel coil |





